From the Studio – Encore! Old Pianos with a New Song

From the Studio: Attracted to Music

Welcome back to my piano art studio. Today I’d like to share with you something simple yet practical.

Hundreds upon hundreds

Every piano has 88 keys, right? And every key has its own corresponding hammer. And I have disassembled 25 pianos to date. Excuse me a moment while I do the math…. Yes, that equals 2,200 hammers that have passed through my hands.

But wait… there’s more! A few technicians have given me old parts by the boxful. Add to that the hammers I’ve purchased to meet some special need, and the number above could easily be doubled. No matter how you look at them, that’s a lot of hammers!

What to do with them

Hammers have appeared in a good many of the mixed media art pieces I’ve created, as well as several of the home decor items. The reason for this is that they are easily recognizable as coming from a piano. Not everyone knows their proper name, but pretty much all know how they are used in a piano: to strike the strings and start the vibration that makes music.

Apart from key chains, of which I’ve made more than 1,000 to date, I’ve really found myself attracted to the idea of making magnets. Okay, that was corny, I admit. But you would’ve said it too.

The process

As simple as magnets appear to be, they do take a bit of time to put together.

Separate the bridle strap from the bridle wire.
Unscrew the hammer from the action assembly.
Remove the bridle strap from the hammer with a box cutter.
Scrub the entire hammer thoroughly with a wire bristle brush to remove dirt and dust.
Cut the head away from the shank. (And while I’m at it, also cut the butt [i.e. “chicken”] from the other end of the shank.)
Sand all cut edges.
Set aside the largest hammers to be made into magnets; store all the remaining pieces to be used later in other crafts.
Choose the more attractive side of the hammer head and use E-6000 adhesive to glue the magnet button to the opposite side.
Clamp magnet and hammer head for good adhesion; let the adhesive set.
Print out the half-sheet “Story Behind the Art” for hammer magnets.
Fold the half sheet to fit both it and the magnet into a small zippered pouch.
Add personalization whenever requested. Sometimes I practice first on another hammer head, particularly if I think it’ll be hard to fit the phrase or name in the available space.

How to use them

The button magnets I utilize are nice and strong, making these devices useful for holding whatever you wish to display, whether it’s tickets to the next ball game, a photo of your loved one, or your kindergartner’s artwork. Use them on any magnetic surface:

refrigerator
locker
file cabinet
mirror
dry erase board

Hammer magnets can also serve as keepsakes or mementos when you ask me to write names and dates on them. A piano teacher could give a magnet to each of her students, personalized with the date of their piano recital, which the student could then use in their locker at school. It’s a thoughtful and affordable gift on any teacher’s budget.

And this gift idea works well in the other direction too—from the student to the teacher. What mentor wouldn’t be thrilled with a magnet she can proudly display that bears her name and the phrase “#1 Piano Teacher”?

How can I make it mine?

The hammer magnets are available in my shop to purchase individually or in sets of eight. Personalization is optional, but it is free if you choose to do so. I know you feel drawn to go check them out, so I’ll see you soon at Etsy!

♬ ♬ ♬ ♬ ♬ ♬

Thank you for joining me on this tour of the studio. I look forward to seeing you on the next one. Until then, I invite you to check out photos of my other work in the gallery. Enjoy the rest of your day!

From the Studio: Variations on a Theme

From the Studio

Welcome back to my piano art studio. Today I’d like to share with you a piece that may possibly be described as a “happy accident.”

The theme

In a previous article I told you about “Middle C,” which is made using the keys C, D, and E, with the sharps between them, mounted to a piece of wood cut from the piano cabinet, and framed with the key extensions. This is the theme for what would turn out to be a variation.

When I make “Middle C,” I usually make them in batches of five or more. They sell quickly, so I like to have several on hand. I start by cutting the wood to the 7″ x 10″ pieces, then I sand each one until the edges are nice and smooth. Next, I select the key extensions that will form the frame around the edge of the wood, measure, mark, cut, and sand them. When that is done, I select the flanges and letoff buttons that I wish to use for these pieces and check to be sure their a good fit. Then, when all the pieces have been assembled, I take them outside to apply a spray varnish.

The variation

The key extensions are cut specifically for each individual piece of wood, since exact measurements may vary a little from one to the other. For that reason, I like to stack them together with the boards to which they were cut.

One day, while in the process of making a fresh batch of Middle C’s, a brand new idea came to me. To keep from them, I had arranged the key extensions in such a way on top of each panel that they formed a sort of diagonal, rather than leaving them along the edges. It struck me that this arrangement was actually quite beautiful and could stand on its own as unique design. Then, rather than using keys to complete the view, I placed a hammer across the whole.

It wasn’t long before I realized that these too could be customized, by adding an ivory keytop tail in the space beside the hammer. This opens the door for a myriad of possibilities.

The name

Since this design is a variation of that used to create “Middle C,” I decided to call it “Variations on a Theme.” In fact, I’m listening even now to Brahms’ Variations on a Theme of Paganini, Opus 35. In my mind, I see the name written on one of the many albums my mother had in her collection.

The finish

As with the “Middle C,” on the back I add a half-sheet “Story behind the art,” a sawtooth hanger, and two felt bumpers on the bottom corners (a.k.a. key rail punchings), and with that the piece is finished.

How can I make it mine?

“Variations on a Theme” is available in my shop.

♬ ♬ ♬ ♬ ♬ ♬

From the Studio: Middle C

From the Studio

Welcome back to my piano art studio. Today I’d like to share with you a piece that has come to mean a lot of things to a lot of people.

A new backdrop

Years ago I decided to create some pieces mounted on wood from the piano case rather than a stretched canvas. After all, I had lots of wood at my disposal. To begin with, I took a footboard (the panel at the bottom front of the piano, which conceals the strings and the workings for the pedals). I measured the board to see how it could be equally divided, and the result was a stack of smaller pieces measuring 7″ x 10″. I’ve used these measurements ever since.

Also in good supply, at the time, were keys I had taken from off the pianos. In particular, I had several sets of C, D, E, and the sharps between them.

The surplus was due to the fact that I had made quite a few pieces called “Keyed Up,” each of which incorporates two groupings of F-A and only one grouping of C-E. So I decided to showcase these small sets of keys by framing them in the extensions I had cut off of them.

A slight problem

What I didn’t realize was that piano keys are not a uniform thickness from one end to the other. Most of them appear to be, but when placed end to end, I could see the differences. That meant that could almost never have a clean corner on my frames. So I fixed the problem by adding embellishments to each corner, namely, a flange and a let-off button. They covered the imperfections nicely and added a bit of interest in the process. The felt on the letoff buttons can vary in color. In fact, I have found various hues of green, gold, red, and white. I usually incorporate the felts, to add a tiny splash of color; but sometimes I use letoff buttons that have lost their felts, and I think it looks good that way too.

A fitting name

Because this key display always incorporates and begins with the C note, I decided to call it “Middle C.”

A personal touch

The idea to turn “Middle C” into a commemorative plaque started with a custom order. The long-time organist at a particular church was getting ready to retire, and the congregation wanted to recognize his many years of service. Together my customer and I came up with a way to do this.

Since then, many other Middle C’s have been graced with a personal touch to commemorate an anniversary, retirement, or other special occasion.

To repair keys that had lost their ivories, I had purchased several recycled ivory keytop tails (the long skinny part of the ivory key) and heads (the shorter, fatter portion of the key). As it turns out, the tail fit perfectly on the bottom of the frame.

Since ivory is translucent, I paint the back with white so the wood won’t show through. And before adding the inscription, I trace the shape of the ivory tail onto a paper sack and practice writing in that space so I’ll know exactly how I want it laid out. When I’m satisfied with my draft, I then do it again on the ivory keytop tail. I first write in pencil, then go over it in ink. When the ink has dried, I seal it with two coats of varnish. Then when the varnish has cured, I glue it down to the frame.

Whether the “Middle C” is personalized or not, on the back I add a half-sheet “Story behind the art,” a sawtooth hanger, and two felt bumpers on the bottom corners (a.k.a. key rail punchings), and with that the piece is finished.

How can I make it mine?

It’s hard to keep these in stock, as they are one of my best sellers. But as long as I have one available for sale, you’ll find the “Middle C” here in my shop. When you get there, select the option that works best for you, whether standard or customized. Because of their popularity, I always keep this listing active, whether I have any completed Middle C’s in stock or not. When made to order, they usually take me a week to build; but if you find one in stock, you can have it in just a few days. In fact, I’m working on three of them right now: one to fill an order, and two more for you to choose from.

♬ ♬ ♬ ♬ ♬ ♬

Angela’s Piano Barn: Open for Business

From the Studio

Welcome back to my piano art studio. Today I’d like to share with you—not something I’ve made—but the brand new space where pretty much all of that work takes place.

Purchasing a shed

In July 2020, my husband and I ordered a shed to be delivered to our house and set up in the back yard. That shed was to be my workshop. It was beautiful, and huge! And it had a covered porch all the way down the length of the front. I had to sacrifice the swimming pool to make room for the shed. But, oh, I could just imagine spending the evenings on the porch, rocking in our Cracker Barrel rocking chairs, sipping on glasses of iced tea, and enjoying the sunset after a long day of work.

But those plans went by the wayside as soon as we realized that our dream shed was NOT going to fit between our house and our neighbors’ house. So after carefully measuring to be sure it would work, we chose the largest model that logistics would allow: a 12′ x 24′ barn-style shed with a window on either side of the spacious double door. We had to wait several weeks while they built our shed, and it was delivered in November on a drizzly day. But not even the chilly rain could dampen our spirits as we watched our brand new building come into the back yard, led by a very skilled driver. He literally had two inches to spare on either side, but he got it in with no damage whatsoever to our property or our neighbors’.

Fleshing out the carcass

My husband, who is skilled at a good many things, ran wiring to the shed so that I’d have lights and electrical outlets. The inspector thought it came pre-wired because my hubby did such a great job. After the inspection, Patrick and I, along with our son Matthew, worked together to hang drywall. We finished it off with baseboards, chair rail molding, and trim along the top, stopping just short of the lofts. On both ends of the workshop, my husband installed pegboard for me, and we trimmed that out as well. He did most of the mudding and sanding, and I did the painting. We also reinforced the floor with an extra layer of plywood, which I painted, speckled with paint chips, and sealed. Someone in a neighborhood near ours donated his old kitchen cabinets for the workshop. What a blessing that was! We discarded the sink and replaced the countertop. When I had decided on a layout, Patrick fastened the cabinets to the wall, and I got busy painting them too.

All decked out

By design, the workshop sits about 19 inches off the ground. So to get the pianos inside, we needed to build a deck and a ramp. The deck was finished in two days, thanks to my hubby’s expertise and Matthew’s help. The three of us worked hard those two days, and we were quite pleased with the result. The deck measures 8′ x 24′ and runs the entire length of the shed. A single step wraps around the porch, and the corner on one end is angled toward the gate, to make it easier to move the pianos in and out. My husband decided to order an aluminum ramp instead of building one from wood, and that has proven to be an excellent idea. It leads to the deck at the perfect angle and can be put away when not in use.

While shopping around for the rocking chairs I wanted, I found a used one for $40. After about three coats of paint, it looked almost as good as new. We still don’t have a second one, but Matthew gave me his hammock stand, which we had been sharing up to that point, so I can choose whether to sit in the rocker or swing in the hammock. I even take my Sunday naps out there from time to time. In foresight, Patrick installed two 4’x4′ posts while we were building the deck, and those posts now support the sun sail shade which covers a part of the deck. At some point we may cover all of it, but for now, the one does what we need it to. We also have considerable shade from two oak trees.

A year in the making

The workshop and deck technically were finished in February, and right away I began moving in. I had planned the layout of the workbenches, shelving, and pianos, but I miscalculated. Oops! Consequently, we still have two pianos taking up space in the garage. But we moved out of the storage unit, and that was the most important thing to do.

Even though I’ve been working out there for a while, I put off sharing my Piano Barn with you because it still lacked a couple finishing touches. In particular, the countertops were not cut and installed until this past summer—in August in fact—just over one year from the date that we first ordered a shed. I really wanted to take a picture of the studio side with the countertops in place. It is so beautiful, and I love working in there! But alas, I got sick, really sick, and even now several weeks later I never have updated the photos. Oh, well. Right?

Angela’s Piano Barn, est. 2020

The name was my husband’s idea, since we went with the barn style. I’ve been creating piano art since 2011, but the barn is new, hence the date.

I really love the lofts, and both of them are full. The one on the workshop side contains piano cabinet wood accumulated from the 24 pianos I’ve disassembled; while the one on the studio side is filled with blank canvases and boxes of action pieces that I’ve already disassembled, cleaned, and sorted.

At this point I have three piano cases which I use as workbenches. (Actually, one of those is holding parts to a dismantled player piano, so it’s pretty much out of service for now.) Additionally, I have three more piano cases which I intend to convert into desks. In a moment of impatience, I moved a piano into the workshop with the help of my daughter, since the men were not available. We got it in, but I hurt myself in the process, and now I deal with chest pain from costochondritis. This has slowed me down considerably, when it comes to the heavy work of making the desks.

As a finishing touch to the workshop, we purchased a portable air conditioner, a dehumidifier, and a heater, to make working conditions more comfortable. Yes, even in Florida we need a heater. Here in Northwest Florida, the temperature drops to about 20 degrees overnight during the winter.

My rather spacious-looking workshop is cramped on the inside… for now. But the close quarters are merely a motivation to me to keep my work area clean. And once in a while I look around and envision a space without the three piano desks, once they are completed and moved either to a store or to their new home.

♬ ♬ ♬ ♬ ♬ ♬

If you’d like to see examples of things I’ve made in the Piano Barn, hop on over to my shop.

From the Studio: Solfege

From the Studio

Welcome back to my piano art studio! Today I’d like to share with you some interesting things I made from pieces of the 1866 Steinway upright piano.

Fascinating Construction

As I do with every piano, once I got it home, I began to take it apart and study the construction of the individual pieces. All uprights have certain things in common. For instance, they all have hammers, jacks, wippens, backchecks, and so forth. However, they are not all made the same. Sometimes the difference is a matter of practicality, as smaller pianos must have smaller parts that are arranged a bit differently from those found within the upright grands. But sometimes the difference, I believe, is in the style of the manufacturer.

The 1866 Steinway had a wippen assembly that functioned exactly like any other wippen assembly I’ve ever seen—with its jack, flanges, bridle wire, backcheck wire and felt, and the damper spoon. However, the way these parts went together was unlike anything I’d ever seen, and at that point I had taken apart twelve other pianos. The major difference was with the jack, a smallish piece that looks somewhat like a hammer (in most upright pianos, that is). The jacks inside the 1866 Steinway were made of two individual pieces of wood instead of the solid construction I normally see. Also, the part that is normally quite short was in this case almost as long as the longer side, and it was hollow. In most uprights, the backcheck and bridle wires rise behind the jack; but in the case of the 1886 Steinway, the backcheck and bridle wires came up through the hollowed jack. This was a construction I had never seen before, and it fascinated me. For that reason, I wanted to use some of the wippen assemblies in their entirety, to display the unique manner of their construction.

With this in mind, I arranged three complete wippen assemblies in a pinwheel formation in the center of a 12×12 canvas, which I had painted a neutral tone. Then I framed it with “loose action pieces,” namely: jacks, letoff buttons, and backchecks also from the old Steinway. To finish the framing, I used treble hammers from two different grand pianos: one old, like the Steinway, and one newer, to provide a color contrast. I did not use the Steinway hammers because they were reserved for a different project.

A Star Is Born

Getting back to these most unusual jacks, I discovered that their proportions made them perfect for forming a star. I’ve never been able to do this with any other jack because they are too disproportionate for such a design. So I created a second design with the star in the center, using jacks that still had their bit of red felt on them, because the bright red made the star pop with color. The border is composed of a variety of flanges from different pianos of differing ages, with differing patinas. The corners of the canvas are marked with letoff buttons, and just inside each corner is a fan of hammers from both upright and grand pianos.

Now for a Name

As I’ve stated many times before, coming up with a name for my designs is the hardest thing I do. These two creations were no exception. I decided on “Solfege” because the solfege syllables are the building blocks of music, just as these wippen assemblies, together with other action pieces, are the building blocks of piano music.

How can I make it mine?

The “Solfege Triplet” is already sold, but the “Solfege Star” is still available in my shop.

♬ ♬ ♬ ♬ ♬ ♬

No More Pianos, Please

From the Studio

Recently I drove 300+ miles to pick up my final piano. It was my sister’s, and it refused to hold a tune, so I promised her I’d come for it and make something useful and beautiful out of it. But she had to wait several months before I was ready to add anymore piano parts to my already-filled-to-capacity workshop. She was patient, and now her living room has more space.

Over the years many people have donated their old, worn-out pianos to Encore, and I appreciate each one that has come my way. But this lady isn’t as young as she was when she started, and our back yard can’t hold a bigger workshop than the one we already have. So it’s time to say, “No more pianos, please!”

I’m putting it in writing so you all can hold me accountable. For, you see, I’ve said this before. In fact, I told my family that Piano #12 would be my last . . . and then I was offered an 1866 Steinway. Who can say ”no’ to a Steinway? Then came another cascade of offerings, and before long I had rescued 24 pianos from the landfill. My sister’s makes 25. And now I really do need to stop.

There is one instance in which I might would make an exception, and that is if another baby grand were to come my way . . . or, be still my soul, a square grand. In that case, once again, I’m afraid I wouldn’t be able to say ‘no.’

Just sayin’.

Would you?

From the Studio: Biographical Bookends

From the Studio

Welcome back to my piano art studio. Today I’d like to share with you how simply a piece of trash may be redeemed.

Unsightly scrap

Who would have thought something so cotton-pickin’ cute could come from the trash pile?

It’s my passion to take the pieces of old pianos and make something useful and/or decorative out of them. But when it came to the piano desk (the wood that supports the keys), I honestly didn’t know what I could do with it. Several desks have remained stacked in a corner of the garage for years, waiting for me to come up with an idea. One of them was particularly ugly, so I decided to cut it up (to fit it in the trash bin) and throw it away. But as I cut, suddenly the pieces began to take shape. With the rounded edges, some pieces actually looked like books, and I realized I had a treasure.

Unlikely art

Now that I knew I wanted to keep the wood, I began to work more deliberately: measuring, making straight cuts, washing, drying, sanding, more sanding, painting, lettering, varnishing, and at last, adding a strip of felt (also a piano piece) to the bottom. And speaking of lettering, normally I hand-letter anything that contains writing. But for these books, I wanted to give them as authentic a look as possible, so I used a Cricut for the first time in my life. (What an experience!) It was both fun and challenging creating the book titles (yes, I actually made them up), then forming the letters with the Cricut, then preparing the letters for use and placing them on the spines of the books. I found the wood grain to be so beautiful that I decided to leave the “paper” edges in their natural state, rather than painting them gold. They did get a few coats of matte varnish to accentuate the grain and to preserve the wood.

Unfinished posts

The titles of these future biographical blog posts are as follows:

Turquoise bookends
• Victor Borge: Comedy in Music
• Brother Ray: A Biography of Ray Charles

Orange bookends
• Rachmaninoff: From Writer’s Block to Rhapsody
• Lisztomania: How Franz Liszt Rocked the Music World

Blue and Gray bookends
• Beethoven’s Greatest Symphony
• Claude Debussy by Moonlight

Burnt Umber bookends
• Leonard Bernstein: Musician Made in America
• The Passion of Johann Sebastian Bach

How can I make it mine?

Only two sets of bookends are available at this time: the turquoise and the orange, and you may find them both in my shop.

♬ ♬ ♬ ♬ ♬ ♬

From the Studio: Hold the Phone

From the Studio

Welcome back to my piano art studio. Today I’d like to share with you the power of a friendly suggestion.

Not worth keeping?

I was cleaning up my side of the garage one day, and came across a piano desk. This is not a writing desk, but the piece of wood from inside the piano which supports the keys. This piece is utilitarian, but not pretty, and I was going to throw it away. It wouldn’t fit inside the trash bin, so I ran several passes on the table saw to cut it into more manageable pieces. That was when inspiration began to flow again.

The piece somewhat resembles a four-panel door, with several lengths of two-inch thick wood and three sheets of thin wood running down the center. As I cut the desk, these thin wood panels slipped easily out of the grooves that had held them in place. I picked up the small pieces, which now had a groove in them, and thought immediately that these could be made into cell phone holders. Other uses became apparent for my new scraps; and before I knew it, I was placing every piece on the shelf instead of in the trash bin.

Trial and error

The groove wasn’t actually wide enough for a phone with a case, nor did it have a good angle. But again I put the table saw to use, making several passes over the blade until the groove was just the way I wanted it. I sanded the block down and tried it out. It worked fairly well when the phone was in the landscape position, but most of them fell over when I positioned the phone vertically. To fix this, I added “feet” to the bottom, each one made by gluing together two jacks. To my delight, these feet could also hold a cell phone, so now my mount could support two phones at once. I also thought this little device could work just as well to hold business cards, making it even more versatile.

A friendly suggestion

I showed my latest creation to my children, and they loved it. My son Matthew suggested that I drill a hole coming up from the bottom so that a power cord could run through, making the cell phone holder a charging station. It took some doing, but I made it happen. After more sanding and a couple coats of varnish, the cell phone holders were finished.

Now for the hard part

To me, the hardest part of any new creation is giving it a name. My inclination is to theme the title after music theory or a popular song title. This time I deviated just a little bit from that, and called it “Hold the Phone,” since that is its intended purpose.

How can I make it mine?

“Hold the Phone” is available in my Etsy shop. So put your call on hold and click over to the shop now, while these babies are still available. Whether for your phone or your business cards, “Hold the Phone” is the right choice for you. Get one for your office desk and another for your night stand. Your phone will thank you for giving it a place to call home.

♬ ♬ ♬ ♬ ♬ ♬

From the Studio: Piano Pieces

From the Studio

Welcome back to my piano art studio. Today I’d like to share with you something that came out of a day of cleaning and organizing.

Getting Organized

By the time I had taken apart 18 pianos, as you can well imagine, I had thousands of action pieces lying around. Actually, they were in boxes in the garage, and not easily accessible when I wanted to use them in the studio. My sweet husband bought me a 10-drawer crafting organizer. I had seen them but thought they were a bit pricey. He found one at a good price, and I love it! (May I have two?) It took a while to decide which pieces would go in the drawers, but by the end of the day, each drawer was both filled to capacity and labeled. I didn’t empty my boxes, but at least I finally had a selection of pieces that were now readily accessible.

Putting the Pieces to Use

But I don’t disassemble, clean, and sort piano pieces for the fun of it. If I don’t use them in my art, they serve no purpose. The same holds true for canvases. At one point I went crazy buying canvases, getting fully stocked up on 16×20, 11×14, and 4×4 gallery-wrapped canvases. Then all of a sudden, I decided to rework the things I’d been creating on the 4×4 canvases. I normally use them in sets of 4, but I got tired of having to hang all four of them individually. My options were to connect them or use a single 8 x 8 canvas. It would be both cheaper and easier to use the single, larger canvas, but that left me with a couple dozen 4×4 canvases and nothing to do with them. I needed a new idea.

Eureka!

An unopened package of 4×4 canvases was sitting idly by, not far from my 10-drawer organizer. On a hunch, I opened the drawers one at a time and pulled out any piece small enough to fit on the canvas: a hammer (minus the shank and butt), a jack, a few flanges, and a metal washer. With these arranged on top of the still-shrink-wrapped canvases, I also began brainstorming, searching for a catchy phrase that isn’t already overused in the market. I wrote directly onto the shrink wrap packaging, to get a rough idea of what the finished product could look like. While toying with the arrangement of these sundry piano pieces, I thought, “Without piano, my life would be in pieces.” With an emphasis on the words “piano” and “pieces,” this would be perfect!

Decoupage

Normally when I add text to my work, I do it freehand. But this time I decided to try something new (to me). In one of the many YouTube tutorials I’ve watched recently, I saw a lady applying a decorative napkin to a canvas using decoupage. I decided to try that here as well, only I’d be transferring letters instead of a picture. I typed up my phrase several times, experimenting with different fonts. When I found a few that I liked, I transferred (traced) them onto a napkin, then glued the napkin to the top of the canvas. I covered the entire surface with the napkin, although the wording was only in one section. This gave a uniform textured appearance all the way across.

The background is white, and the entire surface is sealed with a gloss varnish. The canvas is deep enough to stand sturdily on your desk or shelf, while a sawtooth hanger on the back also allows for hanging on the wall.

How can I make it mine?

That’s easy. Just click over to my shop and make your selection. In this listing of “Piano Pieces,” you’ll have a choice of a couple variations in font, since I couldn’t make my mind up on just one.

♬ ♬ ♬ ♬ ♬ ♬

From the Studio: The Current of His Love

From the Studio

Welcome back to my piano art studio. Today’s feature combines a new-to-me technique with some seemingly hopeless piano pieces.

Learning something new

Rather than play games on my phone, I like to watch YouTube videos to get new ideas for my creative side. For weeks I binge watched about a half dozen different artists using the fluid acrylic painting technique. It was fascinating to see how the colors swirled around on the canvas. To be honest, at first it didn’t much look like “fine art” to me—you, know “anyone could do that”—until I tried it, that is. Getting the consistency right, getting the quantity right, spreading it around without causing the colors to combine, getting it to dry without cracks—all these things take practice. And yes, I’ve had some fails, as I’m sure the YouTubers have too. There is a learning curve, but it’s true that it’s a more attainable form of art than, say, portrait painting.

Oops! What now?

When I opened one of the pianos that were donated to me, I discovered that nearly all the felts had popped off the hammer cores. Most manufacturers staple them in place, but some use only glue, and glue does not hold up well to heat and high humidity. At first I thought I’d try to glue them back down, but then I found that the felts had also shrunk, since they had evidently been in this sad state for quite a while. So, I had no choice but to finish removing the felts from the hammers.

This left me with a lot of pieces I’d never used before. But given enough time, I found a use for them. To begin with, I cut the cores off the hammer shanks, cut the shanks off the butts, then sanded all the rough edges. The butts went into one drawer for future use, and the shanks went into another.

Then I turned my attention to the cores, and I discovered that they are not all the same size. The ones with ‘fat’ felts on them, which strike the heavy strings at the bottom of the keyboard, are short and stubby; while the cores that were once covered with thin felts (for the higher, thinner strings) are long and thin. And there is a third size in between those two for the hammers in the middle of the action.

Putting them together

Because the acrylic pouring technique yields an illusion of fluidity, I decided that for my first paint pour I’d use the colors of the ocean. I made two of them, each on a 12″ x 12″ canvas, and not surprisingly, they look quite different from one another. For the first one, I painted the hammer cores from that sad piano, using the same colors that were in the watery background, then arranged them in a circle on top of the canvas. On the second canvas, I combined the cores from various pianos, both upright and grand, and so got a slightly different look. The grand piano hammers made the difference because they’re curved at the tail, as opposed to their stumpy upright counterparts.

Now for the hard part

For me the hardest part of creating something new is coming up with a name for it. Because my focus is pianos, I decided a long time ago to give each piece a music-themed title. Sometimes it’s a musical term that I think aptly describes what’s happening on the canvas. Other times it’s the name of a song. In this case, it’s a phrase from within a song. In fact, the song played through my mind constantly as I worked. It’s a hymn that has been set to a few different tunes, and it’s called “O the Deep, Deep Love of Jesus.” My church hymnal presents it with a traditional Gaelic melody (Bunessan) in the Key of C. But my favorite setting is the lovely minor key tune, Ebenezer, composed by Thomas J. Williams.

O the Deep, Deep Love of Jesus

O the deep, deep love of Jesus,
Vast, unmeasured, boundless, free!
Rolling as a mighty ocean
In its fullness over me.
Underneath me, all around me
Is the current of His love;
Leading onward, leading homeward
To my glorious rest above.
O the deep, love of Jesus;
Spread His praise from shore to shore!
How He loveth, ever loveth,
Changeth never, nevermore.
How He watches o’er His loved ones,
Died to call them all His own;
How for them He intercedeth,
Watcheth o’er them from the throne!
O the deep, deep love of Jesus,
Love of ev’ry love the best!
‘Tis an ocean vast of blessing,
‘Tis a haven sweet of rest.
O the deep, deep love of Jesus,
‘Tis a heav’n of heav’ns to me;
And it lifts me up to glory,
For it lifts me up to Thee.
Trevor Francis

Now that you’ve read it, I invite you to listen to a stunning arrangement of my favorite arrangement of this song….

How can I make it mine?

Both paintings are available for sale, the original and the second one.